[FC] horn & signals

[BBRT]

OK Folks,

PLS change the subj line. Try and find this one in any archives if you want 
to know about rear motor mount differences....

R
Chuck S
BBRT
----- Original Message ----- 
From: "Chris & Bill Strickland" <lechevrier at earthlink.net>


> Bryan Blackwell wrote:
>
>>Yes, it is a slight dish, at least compared with a 1964 car rear bracket. 
>>The FC never came with A/C, so it is dished just enough to clear the 
>>balancer - and this part is unique to '64/'65 FCs.  The 1964 car also had 
>>the rear engine mount bolt offset to the rear.  If you use a 1964 car 
>>bracket on a 1960 or an FC, you may run out of adjustment for toe in the 
>>rear.  If you're installing a balancer equipped engine in a wagon, then 
>>just swapping in the 1964 parts works.
>>
>>BTDT :-)
>>
>
> Apparently Bryan *knows*, so I'll believe him  -- look for a bracket
> with a "slight" dish  (or build your own)
>
> Bill
> _______________________________________________
> Corvanatics mailing list
> Corvanatics at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.437 / Virus Database: 271.1.1/2822 - Release Date: 04/20/10 
06:31:00