[FC] any suggestions on cover or topper for rampside

[N2VZD at aol.com]

_http://www.corvair.de/n2vzd/_ (http://www.corvair.de/n2vzd/)   for  
pictures of the cover i used to have.
 
i made a wooden frame that hinged in 2 places.  i used a hot rod hood  pin 
for the front half.  that way i could still use the front part with the  
ramp.  i had a divider to hold luggage in the higher deck over the engine.  
worked good for many years. i hope to make a new one for just the rear  part 
soon out of fiberglass. right now i am using a rubbermaid large deck box  
(available @$100. at home depot or lowes etc) just setting in the ramp area to  
hold luggage , chairs , tables , chairs , etc for shows.it is fairly easy to 
 remove by myself if needed. looks ok and keeps things dry and organized.
by the way , i just painted the back loading area with a mix of rustoleum  
type paint colored a dark gray  with a handful of carbide blast media  
(while paint wet ) on the ramp and lower area for traction.  it looks and  works 
well so far.  seems very tough after dragging the box onto it and  walking 
on it .
regards, tim colson
**************A Good Credit Score is 700 or Above. See yours in just 2 easy 
steps! 
(http://pr.atwola.com/promoclk/100126575x1222585106x1201462830/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=115&bcd
=JulystepsfooterNO115)