[FC] FC Spotlight Accessory
Bryan Blackwell
bryan at skiblack.com
Tue Feb 3 22:13:31 EST 2009
To elaborate a little further, the van had a spotlight on it when we
got it that didn't work. I swapped a light on from our old police
car. I'll probably need to lube it, I can get the number off the
bracket then. It won't be for a while, tho, first is the new engine.
--Bryan
On Feb 3, 2009, at 10:09 PM, Paul Steinberg wrote:
> That appears to be the standard 5" or 6" round spotlight that was
> common for
> many years. don't know what the bracket is, but if you want, you
> can remove
> the spotlight, unscrew the 2 screws holding the spotlight to the
> windshield
> pillar, and there will be a part number on the backside. Usually
> it is a 2
> digit number followed by a L for left, and a R for right hand use.
> I can
> also supply the mounting bracket if you send me the part number.
> Actually,
> I would like to know the part number for my own FC. If anyone
> wants one of
> these spotlights, I probably will have a few. I will need to take
> some
> measurements off my FC to make sure that the shaft length is
> correct. Too
> short, and it will hit the dash. Too long, and it will be too
> close to the
> steering whee. Personally, I like the windshield pillar mounting
> best.
> Paul in CT
More information about the Corvanatics
mailing list