[FC] Rampside/Loadside Chrome and Tonneau Top
Eric Kirven
ultravan345 at yahoo.com
Fri Sep 5 13:57:39 EDT 2008
No, NO!!! LED tailights first. I want to be able todrive at night and not get run over. Oh the pain..... lol
Eric
--- On Fri, 9/5/08, Western Canada CORSA <westerncanadacorsa at shaw.ca> wrote:
> From: Western Canada CORSA <westerncanadacorsa at shaw.ca>
> Subject: Re: [FC] Rampside/Loadside Chrome and Tonneau Top
> To: corvanatics at corvair.org
> Date: Friday, September 5, 2008, 8:19 AM
> Darrell,
>
> I'm right in the midst of adapting a fiberglass tonneau
> for my Rampside.
> I've gone a little nuts and I'm going to adapt a
> "Top Up" system.
> http://www.4are.com/product/topup/ The TopUp system
> isn't cheap, but the
> guys that make it were kind enough to send me one
> "short bed" scissor for
> the pass. side, and a long bed scissor for the drivers
> side. The other
> option I came across were these lifts from Gaylord.
> http://www.gaylordslids.com/ I talked with their tech guys
> and they were
> willing to sell me just the hinges and linear actuators.
>
> The Rampside is so unusual and rare, if you want a tonneau
> you'll either
> have to make it yourself, or have it made. I bought the
> largest used
> fiberglass lid I could find, off an older full size PU. We
> had to make it
> narrower by about 6" and taper it at the same time, as
> the RS bed is about
> 1.5" narrower in the rear than it is behind the cab.
> Then we had to
> lengthen it about 6/8" just to make it fit.
>
> If you're looking to do a hard tonneau let me know and
> I'll share the info I
> generated doing my research. No point in reinventing the
> wheel eh?!
>
> Regards,
> Joel
>
> -----Original Message-----
> From: corvanatics-bounces at corvair.org
> [mailto:corvanatics-bounces at corvair.org] On Behalf Of
> woofcorvair at aol.com
> Sent: Thursday, September 04, 2008 3:00 PM
> To: corvanatics at corvair.org
> Subject: [FC] Rampside/Loadside Chrome and Tonneau Top
>
>
> Hello:
> It would be appreciated, if any of the members/owners
> of the Rampside or
>
> Loadside would have
> any information and/or suggestions on installing any chrome
> on the
> exterior?
> I do not believe that
> I have ever viewed any FC's with external chrome.
> Also, I am interested in any suggestions or information
> on installing a
> tonneau top cover on my
> '62 Rampside. Recommendations and names of supply
> houses would be
> appreciated.
>
> Thanks, Darrell in SW Missouri
>
>
>
> **************It's only a deal if it's where you
> want to go. Find your
> travel
> deal here.
> (http://information.travel.aol.com/deals?ncid=aoltrv00050000000047)
> _______________________________________________
> Corvanatics mailing list
> Corvanatics at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
>
> _______________________________________________
> Corvanatics mailing list
> Corvanatics at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
More information about the Corvanatics
mailing list