[FC] 65 FC Engine Harness

[Western Canada CORSA]

The WCC Member in question checked with Clarks, and the bulkhead connection
is the same for all (?) FCs.

Thanks for the help!

Regards,
Joel

-----Original Message-----
From: corvanatics-bounces at corvair.org
[mailto:corvanatics-bounces at corvair.org] On Behalf Of Bryan Blackwell
Sent: Wednesday, September 03, 2008 11:45 AM
To: Western Canada CORSA
Cc: corvanatics at corvair.org
Subject: Re: [FC] 65 FC Engine Harness


On Sep 3, 2008, at 2:12 PM, Western Canada CORSA wrote:

> A) if the 65 FCs came with alt or generators?

Alternators.
>
> B) is the wiring harness bulkhead connection the same on all years?

Not sure, but a lot changed in '63.
>
> IE Should I use the '65 engine harness if I have a later motor in
> an early
> FC.  "Yes" I am aware that the licence plate connections are  
> different.

I think I'd use the one for the body and modify it to take the  
alternator, especially if it's an internally regulated alt.  A '64  
with a late engine and externally regulated alternator would be the  
best candidate for a '65 harness.

--Bryan
_______________________________________________
Corvanatics mailing list
Corvanatics at corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics
This list sponsored by the Corvair Society of America,
http://www.corvair.org/