[FC] [SCG] FC PG cooler hose

[Larry Claypool]

it's high pressure hose, not molded. go to your napa store and ask for x feet of trans cooler hose.
lc
  ----- Original Message ----- 
  From: Bill Hubbell 
  To: 'Keith Hammett' ; Stock Corvair Group ; corvanatics at corvair.org 
  Sent: Saturday, January 05, 2008 12:39 PM
  Subject: Re: [SCG] FC PG cooler hose


  I am forwarding this to both the Stock Corvair Group list and to Corvanatics

   

  Bill Hubbell

   

   


------------------------------------------------------------------------------

  From: rampside at hotmail.com [mailto:rampside at hotmail.com] On Behalf Of Keith Hammett
  Sent: Saturday, January 05, 2008 11:58 AM
  To: whubbell at umich.edu
  Subject: FC PG cooler hose

   

  I have come to the conclusion, with the help of Jim Davis, that the cooler pressure is what ever the pump(s) is putting out.  This can be as high as 200 psi.
   
  Now the question for the stock corvair group is what is the "special" hose that the 61 assembly manual refers to?  Is it a high pressure hose or does it mean it is molded?
   
  Hope the Stock Group is interested in this.  I would look into it more myself but I do not have access to any FC's that would still have the original stuff on it.
   
  Keith Hammett


------------------------------------------------------------------------------

  Watch "Cause Effect," a show about real people making a real difference. Learn more



------------------------------------------------------------------------------


  This message was sent by the SCG-list mailing list, all copyrights are the property
  of the writer, please attribute properly. For help, mailto:scg-list-help at corvair.org
  This list sponsored by the Corvair Society of America, http://www.corvair.org/
  Post messages to: SCG-list at tiger.skiblack.com
  Change your options: http://www.vv.corvair.org/mailman/options/scg-list
  Get further information about SCG at http://members.cox.net/stock_corvair_group/