[FC] Re: FC Front Anti-roll Bar - was (Lookiing for FC wheel rims)

[Dale Dewald]

At 21:56 9/19/07 -0700, Chris & Bill Strickland wrote:

 >>snip<<
>. Yes, spring rates were different, shocks were
>different, and most Vettes (say, after '58?) ['56, at least, had a
>straight axle] had a front stabilizer, but upper and lower A-arms and
>balljoints were pretty much the same in the entire Chevrolet, Corvette,
>and FC Corvair line.
 >>snip<<

It seems that the FC borrowed all the front suspension parts from the 
full-sized Chevrolet except for the crossmember.  I assume that FC's have a 
narrower track but otherwise the essential geometry is the same.  The 
reason I ask is that I am looking into making a stiffer front anti-sway bar 
than what is offered by ADDCO.  They sell a 3/4" bar, but I am interested 
in making a 7/8" or 1" bar.

Dale Dewald
Hancock, MI