[FC] trouble starting GB....

[BobHelt at aol.com]

In a message dated 6/28/2007 5:09:15 PM US Mountain Standard Time,  
noahsarkinc at earthlink.net writes:

Set the  timing mark at 0 degrees, with the top of number 1 piston at the 
highest  point.  Then set the distributor so the rotor is directly under number  
one spark plug wire, and it should fire up, unless you have something else  
reversed.  Paul in CT



Paul,
You have to be on the compression stroke of #1, otherwise it won't  fire.
Regards,
Bob Helt



************************************** See what's free at http://www.aol.com.