[FC] floor bolts needed for my GB...

[Bryan Blackwell]

I didn't like those - they tend to catch things a bit.  I found some  
button head bolts that use a hex bit that work pretty well at my  
local "good" hardware store.

--Bryan

On Jun 19, 2007, at 11:17 PM, Dennis & Debbie PLEAU wrote:

> unless you are going for a factory stock concours class, I'd put  
> regualr 6 point cap screws in place of the clutch screws.
>
> dp
>
>
>> From: "Merv Krull" <krupross at sunwave.net>
>> To: <corvanatics at corvair.org>, <corvairs at cybrus.net>
>> Subject: [FC] floor bolts needed for my GB...
>> Date: Tue, 19 Jun 2007 18:48:57 -0700
>>
>> Hi all!
>>
>> I tried several places around town and had no luck finding "clutch  
>> head" bolts for the floor panels in my GB. I have 6 in OK shape,  
>> and would like 4 more in similar shape or ten really good ones,  
>> plus the two smaller bolts that connect the panel to the firewall  
>> between the transaxle area and the engine bay.
>>
>> thanX!
>> Merv Krull
>> Salmon Arm, BC