[FC] One more...sway bar

[Bryan Blackwell]

One added comment on sway bar installs - generally you want the 
suspension loaded when you mark for the holes.  If not you may end up 
with it binding as the suspension moves up and down.

--Bryan

On Jul 18, 2006, at 8:59 AM, Bill Wells wrote:

> Ben,
>
>   There is nothing you need to add to the kit. The alignment of the 
> rear bar is much more difficult than the front bar. The attachment 
> method to the rear a-arms does not seem to be the best way, but it 
> works well. I had the most trouble trying to understand the poor 
> instructions that come with the bar. Just holding the bar in place and 
> visualizing what needs to happen helps alot. Get the vehicle high 
> enough to enable your drill to easily access the crossmember and 
> a-arms. The crossmember is thick and will take some exertion to get 
> the holes drilled.
>
>   Good Luck,
>   Bill Wells