[FC] Re: Corvanatics Digest, Vol 4, Issue 2

[Paul Steinberg]

until you can find one, just use two separate choke cables ... one for each carb.  Better than nothing.... Paul in CT
  ----- Original Message ----- 
  From: WARD2WAYNE at aol.com 
  To: corvanatics at corvair.org 
  Sent: Monday, May 02, 2005 4:26 PM
  Subject: [FC] Re: Corvanatics Digest, Vol 4, Issue 2



  Hi everyone  I need help locating a choke splitter and cables for my  61 
  rampside.
  When I got it last year the knob was broken off of the cable in the cab and  
  the cables were
   disconnected from the carburetors.   I got a replacement cable  from Clark;s 
  this past week and installed that  with no problem.  When  I hooked it to the 
  splitter in the rear I   found the splitter stuck pretty  tight.  I used 
  solvents to try to get junk out and then a liberal supply of  white lithium 
  grease.  It still wouldn't move unless  I forced  it. I took the splitter our of the 
  truck and then discovered that the cables had previously been bent on their  
  outside sheath
  and they were not going to move no matter how much I tried to straighten  the 
  cables.
  When I called Clark's this morning they told we there were no replacement  
  splitter and
  cables to be had.  Does anyone out there have the splitter and  cables.  
  Starting cold
   in New England is no fun even in May
   
  _______________________________________________
  Corvanatics mailing list
  Corvanatics at corvair.org
  http://www.vv.corvair.org/mailman/listinfo/corvanatics
  This list sponsored by the Corvair Society of America, http://www.corvair.org/