[FC] Carb Return Spring

[N2VZD at aol.com]

goes thru the hole in the adjuster end of throttle linkage to also hold it 
on. also get under the front and lube everything in sight under the pedal. lube 
the slide if you have one, thats a bad area for stickyness...
make sure the cross shaft is not binding in the brackets on the carbs, may 
need a tweak to align them with the shaft(and a drop of oil also). try it with 
cable unhooked to see if thats part of it. i put lons bearing kits on the 
supports and love the difference. clarks has them also but are a little harder to 
get perfect. i  one of each on 2 of my vehicles.  pictures on website 
somewhere.  
http://www.corvair.de/n2vzd/

tinker time. 
regards, tim colson