[FC] Heater box support

[Bryan Blackwell]

Our GB was set up this way when we got it.  Just a piece of U channel 
across the opening, with a couple of spacers to move the assembly up 
about 3/4" and align it with the duct.  I'll take a photo if you'd like 
and send it once I get the heater box back in.

--Bryan

On Sunday, January 25, 2004, at 11:51 PM, Vairsandts@aol.com wrote:

> Next has anyone installed a bar to mount the heater box on instead of
> mounting to the stock location, ( bed cover for the trans  
> differential)
> please advise with details, measurements etc..again of list if you 
> care to.