[FC] Fuel Tank Sender Mix-Up

[David C. Herrin III]

Why not just solder on some 5/16"  fuel / brake line or even copper 
plumbing tubing ?
Rubber will corrode - until there is a Federal Standard for the 
formulation of gasoline
the manufacture of fuel system components is problematic.
David

* Greenbrier Goon * wrote:

>> From: N2VZD@aol.com
>>
>>> put a piece of fuel line on it cut at an angle on the bottom.  i 
>>> would put a
>>
>> little clamp on it.
>
>
> Do you mean rubber fuel hose?  Will it hold up being submerged in 
> fuel?  By that I mean doe the outside resist fuel as the inside does?
>
> Charles