[FC] Chasing an Oil Leek

[corvanatics@corvair.org]

In a message dated 5/6/2003 11:33:58 AM Eastern Standard Time, 
rampside@ncweb.com writes:

> The seal looked to be good and did not show any signs of leaking. The bell
> housing gasket also did not appear to be the culprit. At any rate I removed
> and replaced the bellhousing, with another bellhousing and gasket and 
> another
> new seal . I still have a leak. Any ideas/ opinions out there

   Did you seal the threads on the flywheel bolts?
   Ken Hand