[FC] steering box

[The Source, Inc.]

My 1962 Rampside has same problem; haven't addressed this problems as yet.

VairMech@aol.com wrote:

><snip> the problem is that the sheet metal triangle that was talked about in 
>the previous post, has come loose at the spot welds in the floor seam. I had 
>to fix my 63 FC because of the very same thing. 
>   My fix for a non show vehicle was to drill from underneath where the seam 
>is and then put 2, 1/4" bolts through the area. It never moved again. 
>   I think this was talked about again in the communique and may be in the 
>tech guide.
>   Ken Hand