[FC] Axle yolk/flange

[The Source, Inc.]

Install yoke onto axle with anti seize compound and use Loctite 242 Blue 
to retain bolt to axle.
Problem is usually the yoke to  differential carrier fit - remove diff 
side seal  - then look and try fit
worn  carrier housing - replace or sleeve is cure.
David

Charles M. Wrobel wrote:

>Hi gang,
>
>I think I may have worn splines on the axle or yolk. Has
>anyone tried to drill and pin one of these? If so, how
>did it go? I'm thinking this might be better than prying
>off the bearing to put on another axle which is
>questionable anyhow. I don't have the yolk with me at
>the moment but maybe there is room to incorporate a
>longer bolt and something machined and fitted to hold
>the yolk solid to the axle?