[FC] lost wax

[Merv and/or Loretta]

Take it down to your local High School and see the metal shop teacher.... if
they dont do casting there, they will know someone who does... good luck!
Merv Krull
Salmon Arm BC
62 GB "Ratfink"

----- Original Message -----
From: "Ben Stiles" <bensbus@paonline.com>
To: <corvanatics@corvair.org>
Sent: Thursday, July 10, 2003 12:13 PM
Subject: [FC] lost wax


> Do any of your have the know-how and equipment or a connection with the
> know-how and equipment to do lost wax castings in aluminum?  I recently
> found a logo badge (plastic) for the camper top on my Greenbrier in a
> junkyard.  It is very unique and somewhat brittle.  I would like to cast
> five or six of these in aluminum, but the casting company I found locally
> has a $400 minimum job order!  It is not worth quite that much to me.
>
> If any of you know someone who might be willing to take on this project
for
> me, PLEASE let me know.  The aluminum badge would be the finishing touch
to
> my top!
>
> Thanks!  Ben Stiles
>                 '61 Rampside
>                 '62 Greenbrier (Ben's Bus)
> _______________________________________________
> Corvanatics mailing list
> Corvanatics@corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics