[FC] mount points for oil and temp gauges

[Patten Del R Civ AFRL/PKP]

  Thanks Vern...yes, it got stripped but I'll be looking for the other
message!!  I have the bolt just went about it a different way.  Since I
still have a couple more to do, I will give your way a try!!

  Del

-----Original Message-----
From: Vern McIntosh [mailto:mcintosh@oregontrail.net]
Sent: Friday, January 31, 2003 3:20 PM
To: corvanatics@corvair.org; Del.Patten@kirtland.af.mil; Woohey@AOL.com
Subject: Re: [FC] mount points for oil and temp gauges


Del,

Yes, just move the idiot-light wire to the switch terminal on the sender.

I've attached a picture from my Corvan daily-driver. (I assume it will be
stripped off by the List Server, so I p-mailed it to you and to Keith).

You can see the sender on the Adapt-a-bolt; the yellow wire is to the gauge,
the brown wire to the idiot light.

The green wire goes under the hose clamp to provide a ground - the filter
bolt gasket insulates the sender, so you have to add a ground.

Look closely and see the white wire going to the temp sender in the old
pressure-switch location.

Vern


> So does it hook up to our warning light or is it a combination?  Either
> way it sounds like a good solution!
>
>   Del

[demime 0.98e removed an attachment of type image/jpeg which had a name of
VDOsender.jpg]
_______________________________________________
Corvanatics mailing list
Corvanatics@corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics