BSCC- Selling my Corvair parts inventory

[Bill Nedderman]

Mark, I would like to buy the 140 engine and will pick up. Bill Nedderman
401 965 3970

  _____  

From: bsc-list-bounces at corvair.org [mailto:bsc-list-bounces at corvair.org] On
Behalf Of Mark Edmonds
Sent: Saturday, October 05, 2013 11:19 AM
To: Bay State Corvairs (MA)
Subject: BSCC- Selling my Corvair parts inventory

 

Hello everyone.  Now that my garage is Corvair-less I am getting rid of my
parts inventory.  Below is a list of some of the stuff.  I will soon be
putting these parts on Virtualvairs, Corvair Forum, Ebay etc. so let me know
if you want something.

Transmission and differentials would be for pick up here. Or, if I get
enough club buyers for some of the bigger stuff I will load up the truck
with big and small parts and bring to a meeting to save everyone shipping.
Like many people I probably have enough stuff to do my own swap meet. I
included Clarks part numbers for reference.

I have a lot more stuff than listed below.

Additionally I have a section of wall covered by small parts (grommets,
seals, odds and ends pieces) still in bags from Clarks, hanging on screws.
I rather sell them as a whole instead of as individual parts at a couple
dollars a piece.  At Clarks prices they total about $250.  I would like to
sell the whole lot for $125.  If you are interested I can send you a
complete list.  

 

If you are interested in something (or want to ask me if I have something
you need that is not listed) you can reply via email or call me -
860*774*1473

Mark Edmonds

 


cu671

3.27 differential - 66-69 - ran in Corsa for 1 yr (2006) prior to installing
3.55 diff.

$          75.00 


cu1176

3.55 posi diff. - 66-69 - was on turbo drivetrain - switched to 3.27 diff.

$       175.00 


cu216Z

4 speed transmission - 66-69 - checked out OK by Terrys Transmissions April
2011

$       200.00 


 

Differential - AF= 65-69 3.55 PG - yokes turn,  gears "frozen"

$  15


 

65 AD differential - (3.55 posi) yokes turn, gears "frozen"

$          50.00 


cu210

Differential empty case - 66-69

$          0


 

4 speed Transmission  gear set - 66-69 - needs shaft and rebuild - with case

$       75


 

  rear springs - 15" x 0.560" dia.  - pair

$  10


cu272

Lower control rod brackets (at differential) - pair 

$10


C11735

lower control rods (strut rod) - rubber outer and nylon inner bushings  -
used in Corsa about 4 years until switched to polyurethane - some wear but
still usable - pair

$          25.00 


C1498, 1499

Stainless Steel Stabilizing Rod (trailing arm to transmission) from Corvair
Underground - about 500 miles on them - pair - painted black

$          25.00 


C6156XR

Clarks rebuilt rear wheel bearing unit - right - never installed

$       100.00 


C2841

Used - Clarks adjustable rear shocks - pair - Gabriel - Made in USA - P6053
4202-0435

$          35.00 


C6765B

Koni front shock top rubber - new in bag - pair

$          10.00 


 

140 engine for rebuild - has alternator, carbs, most of carb linkage,
distributer, exhaust logs, some shrouds - turns by hand

$       250.00 


 

top engine fan shroud - 140

$            5.00 


 

top engine fan shroud - non 140

$            5.00 


cu57

bellhousing - standard transmission GM3832176

$          10.00 


cu58

bellhousing - PG transmission - GM 3832517

$          10.00 


 

Block cover and fan pulley

$            5.00 


cu333

turbo intake crossover - chrome

$          10.00 


 

headers and mufflers - (pre 1992 Clarks?? - mufflers are different lengths)-
pair - tubes rusty but still usable - tube dia. = 1.35"  - will fit 140 and
should work on other engines as well

$          35.00 


c320/320A

Three front wheel bearings (BR6 - inner - NAPA / SKF) and four front wheel
bearing seals -- (all new in box)

$          25.00 


 

Rear deck lid (engine lid) with support - dark blue - no trim (also have a
lid with hole cut in it for the turbo air intake I ran for a while that has
the rear trim piece)

$0


 

Non-Corvair

 


 

Chevy Transmission - 4 speed/OD manual - from 1980's Chevy pickup - will
mate to SBC (had it on 327)

 


 

Chevy Truck transmission - 4 speed manual with PTO from 1970's C30 dump

 


 

Chevy transmission - 3 speed manual - Saginaw

 


 

Quadrajet carburetors (2)

 

 

 

  _____  

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4142 / Virus Database: 3604/6723 - Release Date: 10/04/13

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.vv.corvair.org/pipermail/bsc-list/attachments/20131009/839f591d/attachment-0001.html