BSCC- Corvair Engine Workstand

[John Weigel]

Thanks Ray, see the sketch in attached PDF for dimensions. If anyone has difficulty opening the PDF, or has any other questions, please email or call.

(508) 655-2138

John  
  ----- Original Message ----- 
  From: bomma at comcast.net 
  To: Bay State Corvairs (MA) 
  Sent: Friday, August 07, 2009 12:44 PM
  Subject: Re: BSCC- Corvair Engine Workstand


  Hi John,

  I know I speak for all those attending the July Monthly Meeting when I say you put on an awesome presentation.  I thank you for 'schlepping' in all the heavy 'props' but like many, actually seeing something rather than reading or listening about a topic, makes the subject matter easier to understand.  It ran a little long but your enthusiasm and knowledge for the subject kept everyone's attention from beginning to end and I even learned something fro the Q & A that followed.

  As for the pictures you e-mailed to the group of the motor stand; I'm wondering if you could re-send the picture of the "naked" motor stand but this time add in some key measurements for any members who would care to make a duplicate of it.  I'm sure there were a few who want to construct one.      

  Many thanks to you again for stepping up and sharing your story about your course at "Corvair College" with our club.   

  Best regards,  Ray 'B'

------------------------------------------------------------------------------


  ----- Original Message -----
  From: "John Weigel" <jwvair65 at verizon.net>
  To: "Bay State Corvairs (MA)" <bsc-list at corvair.org>
  Sent: Friday, July 31, 2009 8:08:46 PM GMT -05:00 Colombia
  Subject: BSCC- Corvair Engine Workstand


  Attached are some pictures and a sketch of the workstand for the Corvair engine.  It's a nice solid base for assembling and torqing the case, easy to make and the cost is minimal (or free if you have some old bed rails around).

  John Weigel


  _______________________________________________ This message was sent by the BSC-list mailing list, all copyrights are the property of the writer, please attribute properly. For help, mailto:bsc-list-help at corvair.org This list sponsored by the Corvair Society of America, http://www.corvair.org/ Post messages to: BSC-list at corvair.org List info: http://www.vv.corvair.org/mailman/listinfo/bsc-list _______________________________________________
Internal Virus Database is out of date.
Checked by AVG - http://www.avg.com 
Version: 8.0.138 / Virus Database: 270.4.5/1533 - Release Date: 7/3/2008 7:19 PM


------------------------------------------------------------------------------


  _______________________________________________
  This message was sent by the BSC-list mailing list, all copyrights are the property
  of the writer, please attribute properly. For help, mailto:bsc-list-help at corvair.org
  This list sponsored by the Corvair Society of America, http://www.corvair.org/
  Post messages to: BSC-list at corvair.org
  List info: http://www.vv.corvair.org/mailman/listinfo/bsc-list 
   _______________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.vv.corvair.org/pipermail/bsc-list/attachments/20090807/6a96c0b5/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Engine Workstand 1.JPG
Type: image/jpeg
Size: 952963 bytes
Desc: not available
Url : http://www.vv.corvair.org/pipermail/bsc-list/attachments/20090807/6a96c0b5/attachment-0001.jpe 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Engine Case Workstand.pdf
Type: application/pdf
Size: 44835 bytes
Desc: not available
Url : http://www.vv.corvair.org/pipermail/bsc-list/attachments/20090807/6a96c0b5/attachment-0001.pdf