BSCC- a new project car!?

[steve boyden]

     I think your quickly becoming our body work expert.  I had bought some 
patch panels years ago but didn't use them. Without any bodywork experience, 
I couldn't decide how I was going to attach the glass panels to the metal. 
More specifically cutting out the old bad stuff and fitting the new without 
a pathetic result. Given your newly acquired knowledge, I personally would 
opt for the metal patch. The only other problem I would consider is all the 
tools involved in the metal work. I would suggest you ask Dave Clark's 
opinion on the subject.          Steve
----- Original Message ----- 
From: "Rick MacDonald" <rickm at smithprint.com>
To: <bsc-list at corvair.org>
Sent: Tuesday, November 22, 2005 8:44 AM
Subject: BSCC- a new project car!?


> Hi everybody, I recently bought Kevin Osborne's 63 coupe. It's nice, but 
> it
> will need some body work in the near future. I'll be replacing the sheet
> metal area between the rear air grill and bumper. Do any of you have
> experience with the fiberglass panels that Clark's sells? They have a 
> panel
> that basically replaces the whole rear of the car! It's reasonably priced,
> but we'll get in there and see if the whole panel has to be cut out. I 
> hope
> I can just cut out and reweld the flat metal area.  I just have to learn 
> how
> to weld!
>
> Geez, a new 2 car garage already filled with 2 Corvairs!! Whodathunkit?
>
> Rick MacDonald
> The Smith Print, Inc.
> 90 Longwater Drive
> Norwell, MA 02061
> 781-878-5555 tel
> 781-878-2040 fax
> rickm at smithprint.com
>
>
> _______________________________________________
> This message was sent by the BSC-list mailing list, all copyrights are the 
> property
> of the writer, please attribute properly. For help, 
> mailto:bsc-list-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: BSC-list at corvair.org
> List info: http://www.vv.corvair.org/mailman/listinfo/bsc-list
> _______________________________________________
>